Deep convective clouds over the northern Pacific and their relationship with oceanic cyclones     

Mingjian Yi  Yunfei Fu  Peng Liu  Zhixia Zheng 《大气科学进展》2015,32(6):821-830

Based on combined Cloud Sat/CALIPSO detections, the seasonal occurrence of deep convective clouds(DCCs) over the midlatitude North Pacific(NP) and cyclonic activity in winter were compared. In winter, DCCs are more frequent over the central NP, from approximately 30°N to 45°N, than over other regions. The high frequencies are roughly equal to those occurring in this region in summer. Most of these DCCs have cloud tops above a 12 km altitude, and the highest top is approximately 15 km. These wintertime marine DCCs commonly occur during surface circulation conditions of low pressure, high temperature, strong meridional wind, and high relative humidity. Further, the maximum probability of DCCs,according to the high correlation coefficient, was found in the region 10°–20° east and 5°–10° south of the center of the cyclones. The potential relationship between DCCs and cyclones regarding their relative locations and circulation conditions was also identified by a case study. Deep clouds were generated in the warm conveyor belt by strong updrafts from baroclinic flows. The updrafts intensified when latent heat was released during the adjustment of the cyclone circulation current. This indicates that the dynamics of cyclones are the primary energy source for DCCs over the NP in winter.  相似文献   

利用MPI实现多幅点云ICP并行配准     

崔家武  周波阳  张兴福  柴向浩  樊树春 《测绘通报》2021,(3):87-90

迭代最近点算法（ICP）是一种用于点云精确配准的经典算法。针对多幅点云进行ICP配准存在耗时多、效率低的问题,本文利用消息传递接口MPI对多幅点云进行分批并行配准。首先并行求解相邻两幅点云的相邻变换矩阵,然后计算每幅点云在当前批次的局部变换矩阵,最后获得每幅点云的全局变换矩阵。本文以DELL PowerEdge R730服务器为计算平台,对空间点总规模达四千多万的65幅点云进行了分批并行配准。试验结果表明：利用MPI对多幅点云进行分批处理可显著加快配准速度,最优进程数为计算机的核数时,加速比为5.3。  相似文献   

激光雷达点云树木建模研究进展与展望   总被引：1，自引：0，他引：1  

曹伟  陈动  史玉峰  曹震  夏少波 《武汉大学学报(信息科学版)》2021,(2)

三维树木几何模型是数字城市与数字林业工程的重要组成部分。针对点云树木建模,深入分析了基于广义(泛在)激光雷达点云的树木模型重建方法,提出了聚类思想建模、图论方法建模、先验假设建模、拉普拉斯算子建模与轻量化表达建模5类建模体系,归纳总结了不同建模体系在树冠枝干的细节表达、建模算法性能、树木模型的多层次细节表达、建模体系综合评价方法等方面存在的共性问题,针对模型信息表达完整性、模型多层次细节重建、融合广义(泛在)点云的树木建模与模型、算法的综合评价研究4个方面给出一些可能的解决方案,并提出三维激光树木几何重建潜在的建模方向。  相似文献   

利用地面激光扫描数据进行建筑物变化检测     

吕钊  康志忠 《武汉大学学报(信息科学版)》2011,36(11)

利用地面激光扫描仪具有的数据获取速度快、精度高、实时性强、能全天候工作等优点,在快速获取三维点云的基础上,通过点云自动拼接、Hausdorff距离检测不同时期建筑物的三维模型变化,并改进了检测算法,提高了算法的执行效率。通过拟合平面构建Delaunay三角网求解变化区域的面积来评估灾害对建筑物的破坏程度,从而为灾害应急响应以及保险理赔等提供了可靠的决策依据。  相似文献   

基于GPS-PWV的不同云系降水个例的综合分析   总被引：1，自引：0，他引：1  

李国平  陈娇娜  郝丽萍 《武汉大学学报(信息科学版)》2011,(4):384-388

利用成都地基GPS观测网的观测数据,结合自动气象站资料计算出GPS遥感的大气可降水量(GPS-PWV)。按照降水性质,选取对流云降水和层状云降水个例,分析不同类型降水过程中GPS-PWV的变化特征。结果表明,对流云降水和层状云降水一般均发生在GPS-PWV的高值阶段。  相似文献   

Cloud Variations under Subtropical High Conditions     

FENG Sh  LIU Qi  FU Yun-Fei 《大气科学进展》2011,28(3):623-635

The cloud variations under subtropical high(STH) conditions during summers over a ten-year period are studied using combined data from the International Satellite Cloud Climatology Project and the National Centers for Environmental Prediction.The results reveal that clouds mainly experience an isolated evolution in the STHs,which is designated in this study by the 1540 gpm geopotential lines at 850 hPa.In the STH domain throughout the Northern Hemisphere,the average amount of total clouds exceeds 30%.Low clouds dominate in the STH domain,contributing over 60%of total cloud amount within the Pacific subtropical high and over 40%within the Atlantic subtropical high.The prevalence of low clouds in above regions is determined by the circulation pattern around 150°-180°E and 850 hPa,which suppresses both the upward development of the cloud tops and the water vapor divergences near the surface.Furthermore,clouds present great geographical incoherence within the STH domain.In the eastern STHs,the amount of middle and low clouds increases to peak in the early morning and decreases to a trough in the afternoon,while the amount of high clouds remains stable throughout the day.Conversely,in the western STHs,the diurnal amplitude of low and middle clouds is less than three,while high clouds dramatically reach the maximum in the afternoon and drop to the minimum in the evening.Among the nine cloud categories,stratocumulus clouds with greater optical thickness account for the most under STH conditions,no matter their occurrence or amount,causing more shortwave cloud radiative forcing to cool the local atmosphere and surface as a consequence.  相似文献   

基于区域多次回波点密度分析的城区LiDAR建筑物提取     

李乐林  江万寿  郭程方 《国土资源遥感》2015,(2):29-35

以正确提取城区Li DAR点云中建筑物为目标,综合利用不同类别目标点云的回波特征以及地形信息,提出了一种基于区域多次回波密度分析的Li DAR点云建筑物提取方法。首先,将点云构建不规则三角网(triangulated irregular network,TIN),获取封闭的等高线;然后,利用等高线间的拓扑关系得到等高线族区域;最后,统计每一区域的多次回波点云密度信息,通过建筑物和树木区域多次回波点云在区域密度上的巨大差异来识别建筑物点云和树木点云。研究结果表明:该方法既充分利用了建筑物表面与植被间多次回波特性的差异,又不否定建筑物边缘同样存在多次回波的现象;通过封闭的等高线自适应地检测出地物目标的轮廓,弥补了传统Li DAR建筑物提取方法的不足;该方法能够较其他方法更准确地提取建筑物。  相似文献   

地面固定式激光扫描点云中建筑物墙面信息的识别提取     

陈源恺 《测绘与空间地理信息》2015,(11)

地面固定式激光扫描系统能够获取大面积高分辨率的被测对象表面三维数据,本研究通过对固定式LiDAR激光数据做初分类,从地面点中粗提取具有少量噪声的建筑墙面数据,然后利用平面区域分割算法和立面约束条件提取建筑物墙面数据。在对两份固定式三维激光扫描点云的实验中,通过对不同分辨率的数据利用本文所提算法都取得了较好的墙面提取效果,实验证明了该方法的有效性。  相似文献   

基于加权约束的单体建筑物点云表面重建算法     

王森援  蔡国榕  王宗跃  吴云东 《地球信息科学学报》2019,21(5):654-662

建筑物点云表面重建在高精度城市测绘、虚拟现实等领域有十分广泛的应用前景。由于建筑物的几何形态多变,重建算法普遍存在计算速率慢、拟合精度低和模型结构不完整的问题。为此,本文以单体建筑物为研究对象,提出基于加权约束的单体建筑物点云表面重建算法,在表面初始化过程中充分考虑数据对结构拟合的贡献。在此基础上,构建基于正则集的单体建筑物表面重建算法,实现建筑物拟合过程中的加权拟合误差、近邻结构平滑的同步优化。针对多类建筑物三维点云的实验结果表明,相比传统的建筑物重建策略,本文的加权约束方法可根据不同类型的点云数据设计自适应权重,并选择模型拟合中最优的权重函数,在高噪声、低精度点云数据下能得到更高精度的单体建筑物表面模型。  相似文献   

An improved segmentation approach for planar surfaces from unstructured 3D point clouds     

Tarek M.  Awwad  Qing  Zhu  Zhiqiang  Du  Yeting  Zhang 《The Photogrammetric Record》2010,25(129):5-23

The extraction of object features from massive unstructured point clouds with different local densities, especially in the presence of random noisy points, is not a trivial task even if that feature is a planar surface. Segmentation is the most important step in the feature extraction process. In practice, most segmentation approaches use geometrical information to segment the 3D point cloud. The features generally include the position of each point (X, Y and Z), locally estimated surface normals and residuals of best fitting surfaces; however, these features could be affected by noisy points and in consequence directly affect the segmentation results. Therefore, massive unstructured and noisy point clouds also lead to bad segmentation (over-segmentation, under-segmentation or no segmentation). While the RANSAC (random sample consensus) algorithm is effective in the presence of noise and outliers, it has two significant disadvantages, namely, its efficiency and the fact that the plane detected by RANSAC may not necessarily belong to the same object surface; that is, spurious surfaces may appear, especially in the case of parallel-gradual planar surfaces such as stairs. The innovative idea proposed in this paper is a modification for the RANSAC algorithm called Seq-NV-RANSAC. This algorithm checks the normal vector (NV) between the existing point clouds and the hypothesised RANSAC plane, which is created by three random points, under an intuitive threshold value. After extracting the first plane, this process is repeated sequentially (Seq) and automatically, until no planar surfaces can be extracted from the remaining points under the existing threshold value. This prevents the extraction of spurious surfaces, brings an improvement in quality to the computed attributes and increases the degree of automation of surface extraction. Thus the best fit is achieved for the real existing surfaces.  相似文献